Receiver sensitivity is the measurement of a sonar receivers ability to detect an input signal. This measurement tells just how small of a return signal the unit is able to pick up and display. The LX5s receiver is more sensitive.
Measurement: LX5- 24uV FL20- 40uV
Receiver gain is a measurement of the total system gain or amplification. Typically the more gain a receiver has the smaller signal it will be able to detect. The LX5 receiver has more gain.
Measurement: LX5- 89.77db FL20- 70.89db
Receiver distortion is a measurement of the sonar receiver to filter, amplify, detect, and display a return signal. A receiver with less distortion will give a more accurate display. The LX5 has less distortion.
Measurement: LX5- less than 1% FL20- more than 40%
Transmit power is a measurement of the output power into the transducer. This is usually defined in Watts peak to peak or Watts RMS. In the sonar world more power means a better return signal with less noise and less filtering. The LX5 has more power.
LX5- more than 2000 Wp-p or 300 Wrms FL20- more than 400 Wp-p or 50Wrms
Conclusions: The LX5 surpasses the FL20 in every sonar measurement that was made. With these measurements it becomes clear that the LX5 is a superior product in respect to its receiver/transmitter design. These measurements were made on off the shelf units using an industry standard tester. What this means to the ice fisherman is that with the LX5 you will get a clearer, less distorted picture of whats below the transducer. We at MarCum believe that these measurements reflect what LX5 users have been seeing on the ice. The MarCum Technologies LX5 is truly the best and this can be backed up and verified by scientific measurements.
CKOutdoors.com Home of T.H.E. Jig Prostaff:Otter Outdoors,Grandt Rods,Marcum,StrikeMaster
Facts ...Marcum vs. Vexilar - - -
This thread has 1 message.
Showing 1 through 1.
You Are Currently Viewing - Fishing Products and Services Forum