NORTH COUNTRY DOCKS - Over-fished or under-fished

Fishing Articles Banner

NORTH COUNTRY DOCKS - Over-fished or under-fished

NORTH COUNTRY DOCKS - Over-fished or under-fished
Wayne Ek (Wayne Ek)
Agape Fishing Guides


I sometimes think that a dock is the only piece of structure on a lake that is over-fished and under-fished at the same time. On any given weekend you can see bass anglers pounding the docks. They may be fishing for fun or fishing in a tournament, but the docks will get hit hard. At the same time a majority of these anglers are under-fishing the docks. They come up to the dock, make a couple of flips, casts or pitches and then speed off to the next dock. I’ve even seen angler’s catch a bass off a dock and still move on to the next dock, never revisiting the area that just gave up a fish.

As a fishing guide in West Central Minnesota and a fanatical tournament angler, I get to spend almost every day on the water. Seeing other anglers speed-fish down a row of docks is a common occurrence in my area. I think there are a couple of reasons that people fish through docks so quickly. One reason is that there are so many docks to fish. Some lakes have a staggering number of docks, boatlifts and pontoon boats. I believe angler’s see all these potential fish holding targets and feel they have to hit every single one of them! The second reason; we hear, see and read so much about professional tournament angler’s fishing fast or power-fishing. A lot of professional angler’s do fish fast, but fast fishing is not sloppy fishing. You can bet that these professionals slow down when they hit a productive dock or shoreline that’s holding productive docks. By slowing down and fishing the docks thoroughly these professionals will wring every last bass off a section of docks or a single dock, and so should you.

What makes one dock or a section of docks more productive than others? I don’t think there is an easy ABC answer to this one. However, there are some things that I look for when I’m targeting docks on a new lake. I like docks that sit on a quick breaking shoreline. A good lake map will help you find these areas. Or if you see a section of docks, and they are all really short, just sticking out into the lake one or two sections, that’s a really good indication of a quick breaking shoreline. I like docks that have submergent vegetation around them. And any clustering of docks/boat lifts, such as marina’s, resorts or lake association docks seem to hold more fish than just a single dock. I think docks along shallow sterile shorelines, without submergent or emergent vegetation are usually a waste of time and energy.
You don’t have to fish every dock to see if they hold fish. On clear lakes I will put the trolling motor on high and cruise down a set of docks, not even fishing, just looking. I’m looking for small sunfish, bluegills or any bass. It has been my experience that a dock holding “gills” will also hold bass. It’s a quick way to eliminate some unproductive water.

As a general rule, the sunnier and calmer the day, the tighter fish will hold to the docks. Usually the dock bite will be better in the late morning to late afternoon. On cloudy days, the fish will be more prone to roam away from the docks. Actually, when it’s rainy or cloudy the areas in between the docks may hold more bass than the docks themselves. All docks are somewhat different in design, but there are a couple of high percentage areas (for bass) that you should look for. Anytime there is a pontoon boat tied to a dock, under that pontoon is a high percentage area. When a boat or pontoon sits on a lift, right behind the motor will be a washout hole, created when the owner’s power the boat/pontoon off or onto the lift; another high percentage spot. Some docks will have fish cages or bait-boxes hanging on them (large screen boxes to hold fish or bait) these boxes rarely sit on the bottom of the lake, so there is a space between the bottom of the box and the lake bottom; another very high percentage point. And last, any ladder coming off the dock into the water has the potential to hold a bass or two.

If I had to use just one rod to fish docks (thank God I don’t) it would be a 5’6” to 6’ medium heavy spinning rod, with a size 30 spinning reel, loaded with a quality-braided line. This is a great rod to skip docks with and you can still pitch the corners or hit the open water between docks with this rig. When working a dock pattern I like to have 3 rods rigged for different purposes. My first rod will be a spinning rod/reel combination that I use for skipping under docks and pontoons. Even though I field-staff for Quantum, it’s a rod made by Falcon Rods. The rod is a (FS-6-156) 5’6” MH, rated for 8-15 lb. test line. I believe the rod was a specialty rod, made for float tube fishermen. I do not know if it is still in production. For a reel, I use the Quantum Catalyst 30. At first this may seem like too large a reel for this size rod, but this wide spooled reel seems to allow the line to flow off the spool more smoothly than a smaller reel. This allows me to make skip casts that go way back under docks and pontoons. The second rod is a bait-casting rig I use for most of my flipping and pitching. For the past couple of years I’ve been using Quantum’s PTC666F, which is a 6’6” medium heavy action with a fast taper, rated for 12-25 lb. lines. The fast taper on this rod allows you to make very accurate pitches to targets, and the butt section has the power to handle braided line and move any fish out away from the docks. I matched this with the new Tour Edition PT reel (the Burner) with 7:1:1 gear ratio, which picks up line lightening fast and handles like a dream. My third rod is usually a spinner-bait or buzz-bait rod used to fish the open water areas between docks. I’ve been using the Quantum PTC706F, which is a 7’ medium heavy, with a fast taper. Last year I used the Energy E600PT (6:2:1 gear ration) on this rod. This year I’m going to use the Dean Rojas signature series rod (PTC706FDR), which is a 7’ medium-heavy, fast tapered rod that was designed as an all-purpose “frog rod”, but Kermit will have to wait as I’ll be tossing buzzers or spinner-baits with this rod. I’m going to use the new Energy PT Burner on this rod also.

I spool a quality-braided line on all the rods mentioned. If I’m fishing very clear water I’ll use a back-to-back uni-knot to attach a fluorocarbon leader to the braid on my skipping rod. Otherwise I use just straight braid.

I keep my lure selection very simple. On the skipping rod (spinning) I use an Eagle Claw (Shaw Grigsby) HP hook in 3/0 size. For plastics I use a Lake Fork Ring Fry. And for a little additional weight I will place a Water Gremlin Bull Shot sinker in size 1/32 just in front of the HP hook. The sinker gives the rig a little more weight for skipping and the cone shape of the sinker helps the rig to climb over all the obstructions associated with dock fishing. For the pitching rod I stick with a Denny Brauer Premier Pro-Model jig, by Strike King Lures, in ½ ounce, matched with a 3X Denny Brauer Chuck for a trailer. And finally on the blade/buzzer rod I like to use an Accent Fishing Products buzz-bait called the “High Rider Buzz B-2”, which has counter rotation blades behind foam floats, which gives it added buoyancy. This allows you to work this buzzer slower than any other buzz-bait I’ve ever used. For a spinner-bait I stick with the “tried and true” Premier Elite in ½ ounce, by Strike King Lures.

Don’t be concerned about fishing behind other anglers, remember even though docks are fished hard there’s still a good chance that they were under-fished. And if you’re going to power fish docks remember that your catch rate will go up if you fish fast but smart. Be safe this summer and we hope to see you on the water.

You can reach Wayne Ek at Agape Fishing Guides, www.agapefishingquides.com.




Author Terms of Service for Written Material
You agree that you are the original author of each article or story that you submit. If you have hired a ghostwriter, then you have already agreed that you have exclusive rights to each article or story you submit.

There are no guarantees that your article or story will be accepted for publication in My Fishing Pals. It is at the sole discretion of My Fishing Pals whether or not to include your article or story. If published, we reserve the right to remove any article at any time.

By submitting your articles to My Fishing Pals, you agree to allow us to:
  • Publish your fishing article on My Fishing Pals.
  • Publish your fishing article in News Feeds.
  • Publish your fishing article to other Websites in promoting My Fishing Pals.
  • You agree that My Fishing Pals is a free service for authors and publishers. You will not be paid for submitting your article or story to our site and you will not be paid if and when your articles or stories are published. You will receive all credit for your work and your name and other pertinent information will be displayed.

    We reserve the right to include advertising on pages with your articles.